Since carpet was suggested...Ok, I'll toss this out there but not good for all applications like portable docks. In FL sun and rain is harsh on wood decking. Mine started putting slivers in feet. At 160+ feet long with a 12x24 deck on the end, redecking would be a ton of work. Days of just removing the old lumber.
So in laminating fiberglass or other fabric, either resin can be used. West System #105 epoxy resin will laminate cloth well in its out-of-the-can consistency. Yet, adding thickeners with various properties turns that same #105 epoxy resin into a whole bunch of different adhesives, fillers, and structural materials.
Pontoon Boat Decking Material Choices There are many different materials which can be used for pontoon boat decking however I’ll be explaining and analysing a few of the most common pontoon boat decking materials.
At this point, the deck has got several soft spots, several leaks, and quite a bit of rotten framing. The fish hold bounds the sides and bottom of the boat, so is completely fiberglass with the exception of the ceiling, (the rotten plywood) and fore/aft bulkheads, which are glass over plywood and in good shape.
Re: Pontoon redecking material? My first pontoon I bought years ago was an old Aqua Patio 24 footer with 19 inch toons and an 85 hp motor. The guy had died and his wife was selling the boat soon after he re-decked it and before new furniture was purchased. Not knowing any better I thought the green treated plywood he used was the right stuff.
3 Types for Boat Flooring 3 Types for Boat Flooring Nowadays there are a lot of different materials that can be used as boat flooring , among which are aluminum, wood and fiberglass. These are the most common used materials for boat flooring and all of these different types of material have various advantages and disadvantages.
This material is used in the construction or renovation of both large and small cruising vessels. Technologies Some decking is made of TBS, PVC, imitation teak or another synthetic material.
First time caller, love your show I'm going to be redecking and recarpeting my pontoon boat. I've been all over forums, Google, etc. trying to find out if marine grade plywood is necessary or if pressure treated plywood (not a fan of this b/c of the drying time needed as I was looking to do this in the next month or so) or regular 3/4 inch plywood sealed with epoxy or some other type of sealant.
I was wondering what you guys think would be the best marerial to use for redecking a 15 foot aluminum boat. It has a plywood deck in it now but it is roting and not able to hold the seats securely.
All of our pontoon boat vinyl flooring is covered by a 3 year warranty. Marine grade plywood is warrantied for 40 years against deterioration. Carpet warranty covers any fading or deterioration.
It will have a non-slip and durable surface that should last longer than your boat. With that you can just spray off all that Catfish slim. As you mentioned, if you just paint the floor you will slid off your deck. ... Subject: Re: Best decking material for a pontoon? Expert Posts: 1541 (220.127.116.11) Aluminum all the way do it right the ...
Best Decking Material for Boat Dock/Pier. PurdueSkier Posts: 147 Baller . ... but the treated wood deck is shot. I am looking for some advice on the best material to use for replacement. Treated wood is the cheapest option, but composites such as Seventrust or similar as well as solid PVC and others are out there also. ... rain is harsh on wood ...
Nonskid alternatives to teak decking like so many other things in boating, come in the form of acronyms: PVC and EVA. ... Boat Deck Alternatives Go For Faux ... Teak, That Is. ... you should look for material that is color consistent all the way through with the caulk lines included so that any damage can be sanded out. Several of these brands ...
The previous owner installed pressure treated planks as the decking about a year ago. Used SS screws to attach them the the stringers. Ugh! In all the forums I read the new PT chemical is copper based and will corrode the aluminum in no time at all so they have to come out. ... Composite Decking for aluminum boat? Its weak, heavy and expensive ...